Aluminum Alloy 99.5%
EN AW-1050
Available formats: Sheet metal, plates, bars, profiles and wires.
Aluminum Alloy EN AW-1050 commercial purity with excellent corrosion resistance and good electrical and thermal conductivity.
It is applied in jewelery, chemical industrial, containers of hydrogen peroxide, architecture, packaging for pharmaceutical and food products, locks, metalwork, roofs, screens, etc.
Very used for packaging applications and products where high mechanical characteristics such as reflectors, screens, are not needed?
features
Annealing: 30 min. at 2 hours at 325 ° C - 360 ° C, air cooling.
Alloy in which aluminum is presented in its greatest purity, has an excellent resistance to atmospheric agents, a high thermal and electrical conductivity and an excellent resistance to deformation and corrosion of certain acids. However, its mechanical characteristics are relatively modest.
Chemical Composition According to EN 573? 3
|
%
|
Si
|
Fe
|
Cu
|
Mn
|
Mg
|
Cr
|
Zn
|
Ti
|
Others
|
Al
|
|
|
Min. |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
|
Max. |
0,25 |
0,4 |
0,05 |
0,05 |
0,05 |
- |
0,07 |
0,05 |
- |
0,03 |
99,5% |
Chemical Composition According to EN 573? 3
|
Element
|
Min.%
|
Max. %
|
|
Si Fe Cu Mn Mg Cr Zn Ti Zr Others Al |
- - - - - - - - - - - |
0,25 0,40 0,05 0,05 0,05 - 0,07 0,05 - 0,03 99,5 |
International Equivalences
|
USA
|
SPAIN
|
FRANCE
|
GERMANY
|
GB
|
SWEDEN
|
SWITZERLAND
|
CANADA
|
ITALY
|
|
AA |
UNE |
AFNOR |
DIN (1712-1725) |
BS |
SIS |
VSM |
ALCAN |
UNI |
|
1050 |
L-3051 |
TO 5 |
Al95.5 |
1 B |
4007 |
Al95.5 |
1S |
4507 |
International Equivalences
| USA | AA | 1050 |
|---|---|---|
| Spain | UNE | L-3051 |
| France | AFNOR | TO 5 |
| Germany | DIN (1712-1725) | Al99.5 |
| GB | BS | 1 B |
| Sweden | SIS | 4007 |
| Switzerland | VSM | Al99.5 |
| Canada | ALCAN | 1S |
| Italy | UNI | 4507 |
General Physical Properties
|
Module
Elastic N / mm² |
Weight
specific gms / cm³ |
Temperature
of fusion in ° C |
Coefficient of
linear dilation ? m / mK |
Conductivity
thermal W / mK |
Resistivity
electric ?? m |
Conductivity
electric % IACS |
Potential of
dissolution V |
|
69.000 |
2,7 |
646 - 657 |
23,6 |
229 |
29 |
61,6 |
-0,84 |
Physical Properties
| Elastic module N / mm² |
69.000 |
|---|---|
| Specific weight gms / cm³ |
2,7 |
| Melting temperature in ° C |
646 - 657 |
| Linear expansion coefficient ? m / mK |
23,6 |
| Thermal conductivity W / mK |
229 |
| Electrical resistivity ?? m |
29 |
| Electric conductivity % IACS |
61,6 |
| Dissolution potential V |
-0,84 |
Technological skills (MB Very Good | B Good | C Correct | R Regular | M Bad)
WELDING
- To the flame (MB)
- Al argon under argon gas (MB)
- By electrical resistance (MB)
- Braised (MB)
ANODIZED
- Protective (B)
- Decorative (B)
- Hard Anodized (MB)
MECHANIZATION
- Chip Fragmentation (M)
- Surface brightness (MB)
REPUJADO
- In state: O (MB)
NATURAL BEHAVIOR
- In rural environment (MB)
- In industrial environment (B)
- In marine environment (R)
- In seawater (R)
COVERING
- Lacquered (MB)
- Galvanized (B)
- Chemical nickel (B)
EMBUTITION
- By expansion (B)
- Deep drawing (B)
FOOD
- Food use (MB)
Formats
- Aluminum Alloy Sheet EN AW-1050
- Aluminum Alloy Plates EN AW-1050
- Bars Aluminum Alloy EN AW-1050
- Aluminum Alloy Profiles EN AW-1050
- Aluminum Alloy Tubes EN AW-1050
- Aluminum Alloy Wires EN AW-1050
English 
Español 
Português 
Deutsch 
Français