EN AW-5754
Available formats: Sheet metal, plates, bars, tubes and profiles.
The Aluminum Magnesium Alloy EN AW 5754 is an alloy of high mechanical resistance, with good corrosion resistance, comparable to that of pure aluminum in general and even better than that of the latter, if it is a marine environment.
It is applied in cauldron, either welded or riveted. Indicated for the manufacture of pressure vessels: for the production and storage of liquefied gases (O2, N2, A, He). Due to its high resistance to corrosion in marine environments, it is very suitable for shipbuilding, refrigerators, ship superstructures, lifeboats, floats.
Heat treatments:
Annealing: 30 min. at 2 hours at 345 ° C - 380 ° C.
Forging: Optimum temperature 450 ° C (range 350 ° C to 510 ° C)
Chemical Composition According to EN 573? 3
%
|
Si
|
Fe
|
Cu
|
Mn
|
Mg
|
Cr
|
Zn
|
Ti
|
Bi
|
Mn + Cr
|
Others
|
Al
|
Min. |
- |
- |
- |
- |
2,6 |
- |
- |
- |
- |
0,1 |
- |
- |
Max. |
0,4 |
0,4 |
0,1 |
0,5 |
3,6 |
0,3 |
0,2 |
0,15 |
- |
0,6 |
0,15 |
Rest |
Chemical Composition According to EN 573? 3
Element
|
Min.%
|
Max. %
|
Si Fe Cu Mn Mg Cr Zn Ti Bi Mn + Cr Others Al |
- - - - 2,6 - - - - 0,1 - - |
0,4 0,4 0,1 0,5 3,6 0,3 0,2 0,15 - 0,6 0,15 Rest |
International Equivalences
USA
|
SPAIN
|
FRANCE
|
GERMANY
|
GB
|
SWEDEN
|
SWITZERLAND
|
CANADA
|
ITALY
|
AA |
UNE |
AFNOR |
DIN (1712-1725) |
BS |
SIS |
VSM |
ALCAN |
UNI |
5754 |
L-3390 |
A-G3M |
AlMg3 |
- |
4130 |
Peraluman-300 |
57S |
3059 |
International Equivalences
USA | AA | 5754 |
---|---|---|
Spain | UNE | L-3390 |
France | AFNOR | A-G3M |
Germany | DIN (1712-1725) | AlMg3 |
GB | BS | - |
Sweden | SIS | 4130 |
Switzerland | VSM | Peraluman-300 |
Canada | ALCAN | 57S |
Italy | UNI | 3059 |
General Physical Properties
Module
Elastic N / mm² |
Weight
specific gms / cm³ |
Temperature
of fusion in ° C |
Coefficient of
linear dilation ? m / mK |
Conductivity
thermal W / mK |
Resistivity
electric ?? m |
Conductivity
electric % IACS |
Potential of
dissolution V |
70.000 |
2,70 |
590 - 645 |
23,8 |
132 |
53 |
35,3 |
-0,85 |
Physical Properties
Elastic module N / mm² |
70.000 |
---|---|
Specific weight gms / cm³ |
2,70 |
Melting temperature in ° C |
590 - 645 |
Linear expansion coefficient ? m / mK |
23,8 |
Thermal conductivity W / mK |
132 |
Electrical resistivity ?? m |
53 |
Electric conductivity % IACS |
35,3 |
Dissolution potential V |
-0,85 |
Technological skills (MB Very Good | B Good | C Correct | R Regular | M Bad)
WELDING
- To the flame (MB)
- Al argon under argon gas (MB)
- By electrical resistance (MB)
- Braised (R)
ANODIZED
- Protection (MB)
- Decorative (B)
- Hard Anodized (MB)
MECHANIZATION
- Chip Fragmentation (R)
- Surface brightness (MB)
REPUJADO
- In state: O (R)
NATURAL BEHAVIOR
- In rural environment (MB)
- In industrial environment (MB)
- In marine environment (MB)
- In seawater (B)
COVERING
- Lacquered (B)
- Galvanized (B)
- Chemical nickel (B)
EMBUTITION
- By expansion (B)
- Deep drawing (B)
FOOD
- Food use (MB)
Formats
- Aluminum plates Magnesium Alloy EN AW 5754
- Aluminum plates Magnesium Alloy EN AW 5754
- Bars Aluminum Alloy Magnesium EN AW 5754
- Tubes Aluminum Magnesium Alloy EN AW 5754
- Profiles Aluminum Magnesium Alloy EN AW 5754
- Aluminum Wire Magnesium Alloy EN AW 5754