Aluminum Alloy Magnesium Silicon
EN AW-6060
Available formats: Bars, tubes and profiles.
EN AW 6060 extrusion alloy is widely used in European countries and is the most widely used due to its high hot deformation capacity, high extrusion speed and high propensity to achieve an excellent degree of aesthetic finish, in particular by anodizing .
It has average mechanical characteristics and its propensity for deformation makes it ideal even for the creation of profiles of complex shapes for multiple uses of low mechanical load.
Heat treatments:
- Architectural sections for windows, doors, curtain walls.
- Interior accessories, frame systems, lighting, stairs,
railings, fences - Heatsink sections, electronic modules, housings
electric motors. - Flexible mounting systems, special machinery elements.
- Floor for trucks and trailers, pneumatic installation, rail,
interior applications - Watering, heating and cooling pipes.
- Furniture, office equipment.
Chemical Composition According to EN 573? 3
|
%
|
Si
|
Fe
|
Cu
|
Mn
|
Mg
|
Cr
|
Zn
|
Ti
|
Bi
|
Pb
|
Others
|
Al
|
|
Min. |
0,3 |
0,1 |
- |
- |
0,35 |
- |
- |
- |
- |
- |
- |
- |
|
Max. |
0,6 |
0,3 |
0,1 |
0,1 |
0,6 |
0,5 |
0,15 |
0,1 |
- |
- |
0,15 |
Rest |
Chemical Composition According to EN 573? 3
|
Element
|
Min.%
|
Max. %
|
|
Si Fe Cu Mn Mg Cr Zn Ti Bi Pb Others Al |
0,3 0,1 - - 0,35 - - - - - - - |
0,6 0,3 0,1 0,1 0,6 0,5 0,15 0,1 - - 0,15 Rest |
International Equivalences
|
USA
|
SPAIN
|
FRANCE
|
GERMANY
|
GB
|
SWEDEN
|
SWITZERLAND
|
CANADA
|
ITALY
|
|
AA |
UNE |
AFNOR |
DIN (1712-1725) |
BS |
SIS |
VSM |
ALCAN |
UNI |
|
6026 |
L-3441 |
A-GS |
AlMgSi0.5 |
H9 |
4104 |
AlMgSi0.5 |
50S |
9006 / 1 |
International Equivalences
| USA | AA | 6026 |
|---|---|---|
| Spain | UNE | L-3441 |
| France | AFNOR | A-GS |
| Germany | DIN (1712-1725) | AlMgSi0.5 |
| GB | BS | H9 |
| Sweden | SIS | 4104 |
| Switzerland | VSM | AlMgSi0.5 |
| Canada | ALCAN | 50S |
| Italy | UNI | 9006 / 1 |
General Physical Properties
|
Module
Elastic N / mm² |
Weight
specific gms / cm³ |
Temperature
of fusion in ° C |
Coefficient of
linear dilation ? m / mK |
Conductivity
thermal W / mK |
Resistivity
electric ?? m |
Conductivity
electric % IACS |
Potential of
dissolution V |
|
69.500 |
2,70 |
585 - 650 |
23,4 |
200-240 |
28-34 |
48 - 54 |
-0,80 |
Physical Properties
| Elastic module N / mm² |
69.500 |
|---|---|
| Specific weight gms / cm³ |
2,70 |
| Melting temperature in ° C |
585 - 650 |
| Linear expansion coefficient ? m / mK |
23,4 |
| Thermal conductivity W / mK |
200-240 |
| Electrical resistivity ?? m |
28-34 |
| Electric conductivity % IACS |
48 - 54 |
| Dissolution potential V |
-0,80 |
Technological skills (MB Very Good | B Good | C Correct | R Regular | M Bad)
WELDING
- To the flame (B)
- Al argon under argon gas (MB)
- By electrical resistance (B)
- Braised (MB)
ANODIZED
- Protection (MB)
- Decorative (MB)
- Hard Anodized (MB)
MECHANIZATION
- Chip Fragmentation (B)
- Surface brightness (MB)
REPUJADO
- In state: O (B)
NATURAL BEHAVIOR
- In rural environment (MB)
- In industrial environment (B)
- In marine environment (B)
- In seawater (B)
COVERING
- Lacquered (MB)
- Galvanized (B)
- Chemical nickel (B)
EMBUTITION
- By expansion (B)
- Deep drawing (B)
FOOD
- Food use (MB)
Formats
- Aluminum Bars Magnesium Alloy Silicon EN AW- 6060
- Aluminum pipes Magnesium Alloy Silicon EN AW- 6060
- Aluminum Profiles Magnesium Alloy Silicon EN AW- 6060
English 
Español 
Português 
Deutsch 
Français