Aluminum Manganese Alloy
EN AW-3003
Available formats: Plates, Plates, Bars, tubes and profiles.
Aluminum with copper alloy EN AW-3003 has a very good extrusion capacity and, depending on the heat treatment, is very suitable for cold forming. Machinability is acceptable. The alloy can be welded well or very well by several methods.
It is mainly used in the construction, chemical and food, home automation, household appliances and kitchen and home packaging industries.
Heat treatments:
The aluminum alloy manganese EN AW 3003 is mainly indicated for laminated semi-finished products specially indicated for drawing and forming. It does not maintain a good uniformity in anodized finish, so lacquering is more advisable. It has a great heat dissipation power.
Chemical Composition According to EN 573? 3
|
%
|
Si
|
Fe
|
Cu
|
Mn
|
Mg
|
Cr
|
Zn
|
Ti
|
Bi
|
Pb
|
Others
|
Al
|
|
Min. |
- |
- |
0,05 |
1 |
- |
- |
- |
- |
- |
- |
- |
- |
|
Max. |
0,6 |
0,7 |
0,2 |
1,5 |
- |
- |
0,1 |
- |
- |
- |
0,15 |
Rest |
Chemical Composition According to EN 573? 3
|
Element
|
Min.%
|
Max. %
|
|
Si Fe Cu Mn Mg Cr Zn Ti Bi Pb Others Al |
- - 0,05 1 - - - - - - - - |
0,6 0,7 0,2 1,5 - - 0,1 - - - 0,15 Rest |
International Equivalences
|
USA
|
SPAIN
|
FRANCE
|
GERMANY
|
GB
|
SWEDEN
|
SWITZERLAND
|
CANADA
|
ITALY
|
|
AA |
UNE |
AFNOR |
DIN (1712-1725) |
BS |
SIS |
VSM |
ALCAN |
UNI |
|
3003 |
L-3810 |
A-M1 |
AlMnCu |
NS3 |
GA 631 |
Aluman 100 |
D3s |
9003 / 1 |
International Equivalences
| USA | AA | 3003 |
|---|---|---|
| Spain | UNE | L-3810 |
| France | AFNOR | A-M1 |
| Germany | DIN (1712-1725) | AlMnCu |
| GB | BS | NS3 |
| Sweden | SIS | GA 631 |
| Switzerland | VSM | Aluman 100 |
| Canada | ALCAN | D3s |
| Italy | UNI | 9003 / 1 |
General Physical Properties
|
Module
Elastic N / mm² |
Weight
specific gms / cm³ |
Temperature
of fusion in ° C |
Coefficient of
linear dilation ? m / mK |
Conductivity
thermal W / mK |
Resistivity
electric ?? m |
Conductivity
electric % IACS |
Potential of
dissolution V |
|
69.500 |
2,73 |
640 - 655 |
23,1 |
160-190 |
31-41 |
42 - 50.5 |
-0,83 |
Physical Properties
| Elastic module N / mm² |
69.500 |
|---|---|
| Specific weight gms / cm³ |
2,73 |
| Melting temperature in ° C |
640 - 655 |
| Linear expansion coefficient ? m / mK |
23,1 |
| Thermal conductivity W / mK |
160-190 |
| Electrical resistivity ?? m |
31-41 |
| Electric conductivity % IACS |
42 - 50.5 |
| Dissolution potential V |
-0,83 |
Technological skills (MB Very Good | B Good | C Correct | R Regular | M Bad)
WELDING
- To the flame (MB)
- Al argon under argon gas (MB)
- By electrical resistance (B)
- Braised (MB)
ANODIZED
- Protective (B)
- Decorative (B)
- Hard anodized (B)
MECHANIZATION
- Chip Fragmentation (R)
- Surface brightness (B)
REPUJADO
- In state: O (B)
NATURAL BEHAVIOR
- In rural environment (MB)
- In industrial environment (MB)
- In marine environment (B)
- In seawater (B)
COVERING
- Lacquered (MB)
- Galvanized (B)
- Chemical nickel (B)
EMBUTITION
- By expansion (B)
- Deep drawing (B)
FOOD
- Food use (MB)
Formats
- Aluminum Sheet Manganese Alloy EN AW-3003
- Aluminum Plates Manganese Alloy EN AW-3003
- Bars Aluminum Manganese Alloy EN AW-3003
- Aluminum Profiles Manganese Alloy EN AW-3003
- Tubes Aluminum Manganese Alloy EN AW-3003
English 
Español 
Português 
Deutsch 
Français