Aluminum Magnesium Alloy
EN AW-5005
Available formats: Sheet metal, plates, bars, tubes and profiles.
In the Aluminum Magnesium Alloy EN AW 5005, the magnesium content of this alloy increases its mechanical characteristics and makes it suitable for subsistence to other alloys. It has medium mechanical characteristics, very good weldability, excellent corrosion resistance and good response to chemical polishing or
electrochemical
Containing magnesium can be laser cut without any problem both anodized and without anodizing.
Heat treatments:
Annealing on acid hardened material: 30 min. at 2 hours and from 330 ° C to 380 ° C, if the minimum hardening before annealing is greater than 20%.
Annealing Restoration: from 1 to 4 hours and from 240 ° C to 280 ° C.
Obtaining forged parts: from 350 ° C to 480 ° C.
Chemical Composition According to EN 573? 3
|
%
|
Si
|
Fe
|
Cu
|
Mn
|
Mg
|
Cr
|
Zn
|
Ti
|
Bi
|
Pb
|
Others
|
Al
|
|
Min. |
- |
- |
- |
- |
0,5 |
- |
- |
- |
- |
- |
- |
- |
|
Max. |
0,3 |
0,7 |
0,2 |
0,2 |
1,1 |
0,1 |
0,25 |
- |
- |
- |
0,15 |
Rest |
Chemical Composition According to EN 573? 3
|
Element
|
Min.%
|
Max. %
|
|
Si Fe Cu Mn Mg Cr Zn Ti Bi Pb Others Al |
- - - - 0,5 - - - - - - - |
0,3 0,7 0,2 0,2 1,1 0,1 0,25 - - - 0,15 Rest |
International Equivalences
|
USA
|
SPAIN
|
FRANCE
|
GERMANY
|
GB
|
SWEDEN
|
SWITZERLAND
|
CANADA
|
ITALY
|
|
AA |
UNE |
AFNOR |
DIN (1712-1725) |
BS |
SIS |
VSM |
ALCAN |
UNI |
|
5005 |
L-3350 |
A-G0.6 |
AlMg1 |
N41 |
4106 |
AlMg1 |
B57S |
9005 / 1 |
International Equivalences
| USA | AA | 5005 |
|---|---|---|
| Spain | UNE | L-3350 |
| France | AFNOR | A-G0.6 |
| Germany | DIN (1712-1725) | AlMg1 |
| GB | BS | N41 |
| Sweden | SIS | 4106 |
| Switzerland | VSM | AlMg1 |
| Canada | ALCAN | B57S |
| Italy | UNI | 9005 / 1 |
General Physical Properties
|
Module
Elastic N / mm² |
Weight
specific gms / cm³ |
Temperature
of fusion in ° C |
Coefficient of
linear dilation ? m / mK |
Conductivity
thermal W / mK |
Resistivity
electric ?? m |
Conductivity
electric % IACS |
Potential of
dissolution V |
|
69.500 |
2,70 |
630 - 655 |
23,5 |
210 |
33 |
52 |
-0,83 |
Physical Properties
| Elastic module N / mm² |
69.500 |
|---|---|
| Specific weight gms / cm³ |
2,70 |
| Melting temperature in ° C |
630 - 655 |
| Linear expansion coefficient ? m / mK |
23,5 |
| Thermal conductivity W / mK |
210 |
| Electrical resistivity ?? m |
33 |
| Electric conductivity % IACS |
52 |
| Dissolution potential V |
-0,83 |
Technological skills (MB Very Good | B Good | C Correct | R Regular | M Bad)
WELDING
- To the flame (B)
- Al argon under argon gas (MB)
- By electrical resistance (MB)
- Braised (B)
ANODIZED
- Protection (MB)
- Decorative (MB)
- Hard Anodized (MB)
MECHANIZATION
- Chip Fragmentation (M)
- Surface brightness (B)
REPUJADO
- In state: O (R)
NATURAL BEHAVIOR
- In rural environment (MB)
- In industrial environment (MB)
- In marine environment (B)
- In seawater (B)
COVERING
- Lacquered (B)
- Galvanized (R)
- Chemical nickel (B)
EMBUTITION
- By expansion (B)
- Deep drawing (B)
FOOD
- Food use (MB)
Formats
- Aluminum plates Magnesium Alloy EN AW-5005
- Aluminum plates Magnesium Alloy EN AW-5005
- Bars Aluminum Alloy Magnesium EN AW-5005
- Aluminum tubes Magnesium Alloy EN AW-5005
- Profiles Aluminum Magnesium Alloy EN AW-5005
English 
Español 
Português 
Deutsch 
Français