Aluminum Magnesium Alloy
EN AW-5086
Available formats: Sheet metal, plates, bars, tubes and profiles.
Aluminum Alloy Magnesium EN AW 5086 is an alloy with high mechanical characteristics, with very good corrosion resistance. Aluminum alloy Magnesium EN AW 5086, is applied in signaling porches, land transport, mines, cisterns, coal dryers, mine boxes, aeronautics, in naval applications such as super structures, rudders, castles, compressed air bottles.
It is used in structures and equipment for shipbuilding (welded components), masts, chemical platforms and storage tanks such as cryogenics, soldier tank trailers and rear hopper soldiers.
Heat treatments:
Annealing: 30 min. at 2 hours at 340º C- 380º C
EN AW-5086 may undergo intercrystalline cracking and corrosion under stress after inadequate heat treatments (welding).
Do not use at more than 65 ºC if you are going to be exposed to aggressive environments.
Chemical Composition According to EN 573? 3
|
%
|
Si
|
Fe
|
Cu
|
Mn
|
Mg
|
Cr
|
Zn
|
Ti
|
Bi
|
Zr + Ti
|
Others
|
Al
|
|
Min. |
- |
- |
- |
0,2 |
3,5 |
0,05 |
- |
- |
- |
- |
- |
- |
|
Max. |
0,4 |
0,5 |
0,1 |
0,7 |
4,5 |
0,25 |
0,25 |
0,15 |
- |
- |
0,15 |
Rest |
Chemical Composition According to EN 573? 3
|
Element
|
Min.%
|
Max. %
|
|
Si Fe Cu Mn Mg Cr Zn Ti Bi Zr + Ti Others Al |
- - - 0,2 3,5 0,05 - - - - - - |
0,4 0,5 0,1 0,7 4,5 0,25 0,25 0,15 - - 0,15 Rest |
International Equivalences
|
USA
|
SPAIN
|
FRANCE
|
GERMANY
|
GB
|
SWEDEN
|
SWITZERLAND
|
CANADA
|
ITALY
|
|
AA |
UNE |
AFNOR |
DIN (1712-1725) |
BS |
SIS |
VSM |
ALCAN |
UNI |
|
5086 |
L-3322 |
A-G4MC |
AlMg4Mn |
N5 / 6 |
- |
AlMg4Mn |
E54S |
9005 / 4 |
International Equivalences
| USA | AA | 5086 |
|---|---|---|
| Spain | UNE | L-3322 |
| France | AFNOR | A-G4MC |
| Germany | DIN (1712-1725) | AlMg4Mn |
| GB | BS | N5 / 6 |
| Sweden | SIS | - |
| Switzerland | VSM | AlMg4Mn |
| Canada | ALCAN | E54S |
| Italy | UNI | 9005 / 4 |
General Physical Properties
|
Module
Elastic N / mm² |
Weight
specific gms / cm³ |
Temperature
of fusion in ° C |
Coefficient of
linear dilation ? m / mK |
Conductivity
thermal W / mK |
Resistivity
electric ?? m |
Conductivity
electric % IACS |
Potential of
dissolution V |
|
71.000 |
2,67 |
585 - 640 |
23,8 |
126 |
56 |
31 |
-0,86 |
Physical Properties
| Elastic module N / mm² |
71.000 |
|---|---|
| Specific weight gms / cm³ |
2,67 |
| Melting temperature in ° C |
585 - 640 |
| Linear expansion coefficient ? m / mK |
23,8 |
| Thermal conductivity W / mK |
126 |
| Electrical resistivity ?? m |
56 |
| Electric conductivity % IACS |
31 |
| Dissolution potential V |
-0,86 |
Technological skills (MB Very Good | B Good | C Correct | R Regular | M Bad)
WELDING
- To the flame (B)
- Al argon under argon gas (MB)
- By electrical resistance (MB)
- Braised (R)
ANODIZED
- Protection (MB)
- Decorative (R)
- Hard Anodized (MB)
MECHANIZATION
- Chip Fragmentation (B)
- Surface brightness (MB)
REPUJADO
- In state: O (R)
NATURAL BEHAVIOR
- In rural environment (MB)
- In industrial environment (MB)
- In marine environment (MB)
- In seawater (MB)
COVERING
- Lacquered (B)
- Galvanized (B)
- Chemical nickel (B)
EMBUTITION
- By expansion (B)
- Deep drawing (B)
FOOD
- Food use (MB)
Formats
- Aluminum plates Magnesium Alloy EN AW-5086
- Aluminum Plates Magnesium Alloy EN AW-5086
- Bars Aluminum Alloy Magnesium EN AW-5086
- Tubes Aluminum Magnesium Alloy EN AW-5086
- Profiles Aluminum Magnesium Alloy EN AW-5086
English 
Español 
Português 
Deutsch 
Français