Aluminum Alloy Magnesium Silicon
EN AW-6026
Available formats: Calibrated and extruded bars.
The aluminum alloy magnesium silicon EN AW 6026 replaces other alloys of the Aluminum-Silicon family whose applications are found in the textile industry, coils, machine parts, chemistry, flanges, bolts, screws, nuts, etc. and in the automotive, electric and electronic sector, forging, screws, bolts, nuts, threaded parts.
It is an alloy that has good machinability, high strength, anodizing and hard coating, is MIG / WIG weldable, has good corrosion resistance and is environmentally friendly.
Heat treatments:
This new EN AW-6026 alloy offers many advantages and is a further development than the EN AW-6012 alloy.
It has a lead content of less than 0.4% so that the alloy complies with all EU regulations, such as RoHS (2002/95 / EC) and ELV (2000/53 / EC).
Chemical Composition According to EN 573? 3
|
%
|
Si
|
Fe
|
Cu
|
Mn
|
Mg
|
Cr
|
Zn
|
Ti
|
Bi
|
Pb
|
Others
|
Al
|
|
Min. |
0,6 |
- |
0,2 |
0,2 |
0,6 |
- |
- |
- |
0,6 |
- |
- |
- |
|
Max. |
1,4 |
0,7 |
0,5 |
1 |
1,2 |
0,3 |
0,3 |
0,2 |
1,5 |
0,4 |
0,15 |
Rest |
Chemical Composition According to EN 573? 3
|
Element
|
Min.%
|
Max. %
|
|
Si Fe Cu Mn Mg Cr Zn Ti Bi Pb Others Al |
0,6 - 0,2 0,2 0,6 - - - 0,6 - - - |
1,4 0,7 0,5 1 1,2 0,3 0,3 0,2 1,5 0,4 0,15 Rest |
International Equivalences
|
USA
|
SPAIN
|
FRANCE
|
GERMANY
|
GB
|
SWEDEN
|
SWITZERLAND
|
CANADA
|
ITALY
|
|
AA |
UNE |
AFNOR |
DIN (1712-1725) |
BS |
SIS |
VSM |
ALCAN |
UNI |
|
6026 |
- |
- |
AlMgSiBi |
- |
- |
- |
- |
- |
International Equivalences
| USA | AA | 6026 |
|---|---|---|
| Spain | UNE | - |
| France | AFNOR | - |
| Germany | DIN (1712-1725) | AlMgSiBi |
| GB | BS | - |
| Sweden | SIS | - |
| Switzerland | VSM | - |
| Canada | ALCAN | - |
| Italy | UNI | - |
General Physical Properties
|
Module
Elastic N / mm² |
Weight
specific gms / cm³ |
Temperature
of fusion in ° C |
Coefficient of
linear dilation ? m / mK |
Conductivity
thermal W / mK |
Resistivity
electric ?? m |
Conductivity
electric % IACS |
Potential of
dissolution V |
|
69.500 |
2,80 |
640 - 655 |
23,1 |
160-190 |
34-41 |
42 - 50.5 |
-0,83 |
Physical Properties
| Elastic module N / mm² |
69.500 |
|---|---|
| Specific weight gms / cm³ |
2,80 |
| Melting temperature in ° C |
640 - 655 |
| Linear expansion coefficient ? m / mK |
23,1 |
| Thermal conductivity W / mK |
160-190 |
| Electrical resistivity ?? m |
34-41 |
| Electric conductivity % IACS |
42 - 50.5 |
| Dissolution potential V |
-0,83 |
Technological skills (MB Very Good | B Good | C Correct | R Regular | M Bad)
WELDING
- To the flame (B)
- Al arc under argon gas (B)
- By electrical resistance (B)
- Braised (R)
ANODIZED
- Protective (B)
- Decorative (B)
- Hard Anodized (MB)
MECHANIZATION
- Chip Fragmentation (R)
- Surface brightness (B)
REPUJADO
- In state: O (B)
NATURAL BEHAVIOR
- In rural environment (B)
- In industrial environment (B)
- In marine environment (R)
- In seawater (R)
COVERING
- Lacquered (B)
- Galvanized (B)
- Chemical nickel (B)
EMBUTITION
- By expansion (R)
- Deep drawing (B)
FOOD
- Food use (M)
Formats
- Calibrated aluminum bars Magnesium Alloy Silicon EN AW- 6026
- Aluminum Extruded Bars Magnesium Alloy Silicon EN AW-6026
English 
Español 
Português 
Deutsch 
Français