Aluminum Alloy Magnesium Silicon
EN AW-6082
Available formats: Sheet metal, plates, bars, tubes, profiles and wires.
The Aluminum Alloy Magnesium Silicon EN AW 6082 is ideal for molds of the footwear industry, blown plastic bottles, thermoforming, rubber industry, molds and dies for the industry in general.
Models for casting and plates. Of general use for the construction of industrial machinery, armament and armor. In automotive for industrial vehicles. It is used to make templates.
Heat treatments:
Put in solution: 535 ° C of 30 min. 2 hours
Tempering in cold water (40 ° C max.) As fast as possible.
Maturation: State T4, 8 days minimum at 20 ° C.
Artificial maturation: T6 state, 16 hours at 165 ° C or 8 hours at 175 ° C.
Annealing: 30 min. at 2 hours at 380 ° C - 420 ° C, followed by slow cooling.
Hot work: from 300 ° C to 490 ° C.
Chemical Composition According to EN 573? 3
|
%
|
Si
|
Fe
|
Cu
|
Mn
|
Mg
|
Cr
|
Zn
|
Ti
|
Bi
|
Pb
|
Others
|
Al
|
|
Min. |
0,7 |
- |
- |
0,4 |
0,6 |
- |
- |
- |
- |
- |
- |
- |
|
Max. |
1,3 |
0,5 |
0,1 |
1 |
1,2 |
0,25 |
0,2 |
0,1 |
- |
- |
0,15 |
Rest |
Chemical Composition According to EN 573? 3
|
Element
|
Min.%
|
Max. %
|
|
Si Fe Cu Mn Mg Cr Zn Ti Bi Pb Others Al |
0,7 - - 0,4 0,6 - - - - - - - |
1,3 0,5 0,1 1 1,2 0,25 0,2 0,1 - - 0,15 Rest |
International Equivalences
|
USA
|
SPAIN
|
FRANCE
|
GERMANY
|
GB
|
SWEDEN
|
SWITZERLAND
|
CANADA
|
ITALY
|
|
AA |
UNE |
AFNOR |
DIN (1712-1725) |
BS |
SIS |
VSM |
ALCAN |
UNI |
|
6082 |
L-3453 |
A-SGM0.7 |
AlMgSi1 |
H30 |
4212 |
AlMgSi1Mn |
- |
3571 |
International Equivalences
| USA | AA | 6082 |
|---|---|---|
| Spain | UNE | L-3453 |
| France | AFNOR | A-SGM0.7 |
| Germany | DIN (1712-1725) | AlMgSi1 |
| GB | BS | H30 |
| Sweden | SIS | 4212 |
| Switzerland | VSM | AlMgSi1Mn |
| Canada | ALCAN | - |
| Italy | UNI | 3571 |
General Physical Properties
|
Module
Elastic N / mm² |
Weight
specific gms / cm³ |
Temperature
of fusion in ° C |
Coefficient of
linear dilation ? m / mK |
Conductivity
thermal W / mK |
Resistivity
electric ?? m |
Conductivity
electric % IACS |
Potential of
dissolution V |
|
69.500 |
2,70 |
570 - 660 |
23,5 |
184 |
37 |
48,6 |
-0,83 |
Physical Properties
| Elastic module N / mm² |
69.500 |
|---|---|
| Specific weight gms / cm³ |
2,70 |
| Melting temperature in ° C |
570 - 660 |
| Linear expansion coefficient ? m / mK |
23,5 |
| Thermal conductivity W / mK |
184 |
| Electrical resistivity ?? m |
37 |
| Electric conductivity % IACS |
48,6 |
| Dissolution potential V |
-0,83 |
Technological skills (MB Very Good | B Good | C Correct | R Regular | M Bad)
WELDING
- To the flame (MB)
- Al arc under argon gas (B)
- By electrical resistance (MB)
- Braised (B)
ANODIZED
- Protection (MB)
- Decorative (R)
- Hard Anodized (MB)
MECHANIZATION
- Chip Fragmentation (B)
- Surface brightness (MB)
REPUJADO
- In state: O (B)
NATURAL BEHAVIOR
- In rural environment (MB)
- In industrial environment (MB)
- In marine environment (B)
- In seawater (R)
COVERING
- Lacquered (B)
- Galvanized (B)
- Chemical nickel (B)
EMBUTITION
- By expansion (R)
- Deep drawing (R)
FOOD
- Food use (MB)
Formats
- Aluminum Plates Magnesium Alloy Silicon EN AW- 6082
- Aluminum sheets Magnesium Alloy Silicon EN AW- 6082
- Aluminum Bars Magnesium Alloy Silicon EN AW- 6082
- Aluminum tubes Magnesium Alloy Silicon EN AW- 6082
- Aluminum Profiles Magnesium Alloy Silicon EN AW- 6082
- Aluminum Wire Magnesium Alloy Silicon EN AW- 6082
English 
Español 
Português 
Deutsch 
Français